Learn These Tips On How To Fix Water Stains On Ceiling

Learn These Tips On How To Fix Water Stains On Ceiling

Posted by Ren on with 0 Comment

Homeowners spend time, effort, and money just to beautify and maintain their homes. However, sometimes they think that small issues such as little water stains on the ceiling are not a big deal. These issues can lead to water damage and can grow to an extensive and expensive restoration task later on.

In addition, covering water stains with paint will not solve this problem and will just make it worse. You may also consider hiring water damage professional.

Unless you find the source and repair it, there are things you can do on how to fix water stains on the ceiling. Please check out the full article.

Causes of Water Stains on Ceiling

Identifying the source of the water damage is tricky since water travels but what’s causing water stains on the ceiling? Knowing the following will help you prevent further water damage issues.

  • Roofing Issues

Cracked, curled, cupped or missing shingles in any area can lead to an active roof leak, especially in the next rainstorm. Moreover, the drainage of the HVAC unit could also leak in the piping which will cause water seepage under the shingles.

  • Grout and Caulking Problems 

Especially if you have a bathroom on the second floor, check if the grout or caulking around your toilet bowls, tub, or shower is damaged or worn out.

  • Pipe leaks 

Plumbing leaks can cause water pooling and draining into the floor leading to water leaks downstairs causing water stains on the ceiling.

  • Condensation in the Attic

When your attic doesn’t have enough insulation or ventilation, condensation occurs. Excess moisture seeps in and starts to collect in corners.

Fix Water Stains on Ceiling: Without Painting

  • Find the source of water stains and repair it immediately.
  • Cover the floor where you’ll be working and ensure that the room is well ventilated. As part of your safety, don gloves and safety goggles.
  • Make a bleach solution by mixing 3 parts warm water and 1 part bleach. Use oxygen bleach for your colored ceiling.
  • Stand on a stepladder or a sturdy stool. Dip a sponge in the mixture and wipe the stains.
  • To rinse, use a second sponge and dip in clean water. Then dry the affected part with a towel.
  • If there will still be visible stains, leave the mixture overnight to dry completely before an attempt to cover up.

How to fix water stains on the ceiling with painting?

  • Bleach the stain using the method above.
  • If you opt for natural solutions, use white vinegar. Pour this into a spray bottle and spray the stained area. Allow the vinegar to sit and be absorbed for one hour.
  • If the stain persists, try making a solution of 2 cups of water and 1 teaspoon of baking soda. Use a spray bottle with the solution then spray it on the stain. After scrubbing, gently pat the area with a damp cloth (from clean water) to get rid of any residue.
  • If you see flaking or loose paint around the stain, use a scraper to get rid of it first.
  • After bleaching and drying the water stains, you may apply an oil-based undercoat over the stain. Then leave it overnight to dry.
  • To prevent the stain from peeking through, paint a second coat and let it dry. (if necessary)
  • Apply a stain-blocking primer to bind pigments and prevent bleeding from the stained part or area. This will help in reducing the risk of mold growth in the affected area. Allow the primer to dry for 2 hours (at least).
  • After treating the stain, you may repaint the ceiling as normal.

For Getting Rid of Hard Water Stains

When you are dealing with and preventing hard water stains and soap scum, distilled vinegar is one best choice for stain removal. This can easily get rid of deposited minerals. But be extra careful when using it. Vinegar can damage the paint if you leave it on the ceiling for a long period of time.

Soak clean paper towels in vinegar and place them directly on the soap scum deposits. Let it sit for 20 – 30 minutes then wipe it with a clean towel or sponge dampened with water to neutralize the vinegar on the painted surface.

You may also consider installing a water softener in your home to prevent hard water stains and soap scum.

Contact a Water Damage Restoration Company

If you want to maintain a house stain-free and neat, never ignore water stains on your ceilings! Don’t just paint to cover the issue or it will only get worse. Follow the tips above. If you think you couldn’t deal with or remove water stains or if you suspect mold and mildew spreading in your ceiling, please call Superior Restoration.

We provide not only emergency water damage restoration services, but mold and fire damage restoration services as well. We are available 24/7.

Learn how to thaw frozen pipes

Learn How To Thaw Frozen Pipes In The Home 

Posted by Ren on with 0 Comment

Freezing temperatures in wintertime can cause pipes to freeze in the home, making it very inconvenient. When the pipes become frosty, water increases, putting much pressure on them. As a result, water lines in your home swell or even burst when neglected. 

Once you discover frozen pipes in the home, take action there and then to avoid major water damage from occurring to your home. As you read on, you will learn how to find and fix frozen pipes in your home and prevent them from happening.

What You Need to Do to Locate Frozen Pipes in the Home

Certainly, detecting frozen pipes in your home is troublesome. They hamper the water supply on your property and cause severe water damage if not treated properly. Use the provided tips below to locate frozen water lines in your home. 

1. Which Pipes are Prone to Becoming Frosted?

  • Attic, Basement, and Crawl-Space Pipes

Inspect the water lines in your attic, basement, and crawl space regularly during the wintertime because these lines are more prone to freezing since they don't often get heated. So, it would be helpful to insulate them entirely to prevent frozen water pipes from taking place. 

  • Exposed Pipes Along the Exterior Walls

The pipes along the exterior walls are exactly exposed to ice-cold temperatures and generally don't have adequate insulation. So, it would be best if you insulate these pipes adequately to make them less susceptible to getting frosted.

2. Be familiar with the Signs of Frozen Pipes

  • Poor Water Pressure When Turning the Tap On, or the Water Doesn’t Flow Out of the Faucet. 

This is one of the first signs of frozen pipes. The cause may be an ice formation in the tubes that impedes water from flowing adequately through them. 

  • Frosted Pipes Detected

This is a definite sign of frozen pipes that requires prompt action to solve the problem.

  • Swollen Pipes Noticed

This is also an indication that your pipes have frozen. There's probably ice blockage and enlargement inside the lines, creating a swell in them. When there's a lot of pressure on the affected pipes, they may rupture if not treated adequately. 

  • Unusual Odors Sensed

If water does not flow smoothly through the tubes and drain to its proper destination, it will move back into the pipes, causing strange smells.

Once you detect any of the above-stated signs, check the main lines in your basement. If the pipes are frozen but none have ruptured, you may choose to do one of the two options below: 

  1. Seek help from a specialist to thaw the frozen pipes in your home. It's the best solution to solve the issue, especially if you are not confident enough to thaw the pipes yourself or if the frozen area is out of reach. 
  2. Attempt to thaw the affected or frozen pipes on your own if you are confident with your home maintenance skills. However, this option can be hazardous if not correctly done.

3. Learn How To Thaw Frozen Pipes

If you fully trust your home maintenance skills, you can try the following must-learn tips to mend your frozen pipes:

  • Open Your Faucet. 

The thawing process will liquefy the ice buildup in the tubes, producing water. So leave your faucet open to let water flow through the pipes, sending the liquid out. It will also improve the defrosting process.

  • Apply Heat to the Affected Frozen Pipe. 

You can perform this action by wrapping an electric heating pad around the tube, making use of a hairdryer or heat lamps to warm the pipe, or binding a heat cable (heat tape) to the pipe. You can also immerse a towel in hot water and bandage it around the pipe. Be mindful when using the heating pad to avoid a fire hazard from occurring.

  • Remember What Not to Use in Mending Frozen Pipes.

To unfreeze a pipe, never use kerosene or propane heaters, a blowtorch, or any other open flame devices that can cause a terrible fire accident. You can use a space heater if the area is certainly clear of any flammable substances. Be mindful when using the space heater and do not leave it unattended. 

  • Apply Heat Repeatedly Until Water Flows Smoothly.

When you have successfully thawed the frozen pipes, turn your other faucets on to check and find where the other frozen tubes may be. 

  • Once You Located Frozen Pipes Along Your Home's Exterior Wall, Take Action Immediately. 

Never think twice about hiring a professional to deal with this serious situation. Drilling a hole on the wall may be necessary to reveal the frozen parts of tubes and start thawing them.

What to Do to Prevent Frozen Pipes from Occurring

Indeed, we cannot command the weather, but we can do something to protect the pipes from getting frozen. You may try the following tips below:  

  • Drain the liquid from your sprinkler and swimming pool water tubes. They are distinctly possible to freeze. 
  • Disconnect and drain the outdoor hoses and keep them in your garage. Turn off the indoor faucets that supply water to the outdoor hoses.
  • Inspect the insulation around lighting fixtures and vents. Ensure it's adequate to prevent heat from escaping. 
  • Seal any wall cracks or holes in and out of your home. Examine all the sides of the utility service lines carefully.
  • Leave the kitchen cabinet doors open to allow the warm air to roam around on each side of the tubes.
  • Ensure your garage doors are closed to safeguard the water pipes. 
  • Flowing water freezes not quickly. So allow the faucets to drip slightly during the frigid days.
  • Never set your home's thermostat below 55 degrees Fahrenheit when you leave. Maintain the same temperature the entire day.
  • Ensure all the windows and doors of your home have adequate, appropriate seals on them. 
  • You can install a 60-watt bulb in those places where pipes are prone to freezing. Just make sure there are no flammable materials close to the bulb to prevent unwanted fire accidents from happening. 

Contact a Water Damage Restoration Company

Dealing with a frozen-tube issue alone is not easy, especially if the frozen pipe bursts in your house. Shut off the valve of the main water line right away, then contact a water damage restoration company. Seeking help from professionals is an excellent option to avoid further damage to your property. Remember that water damage can cause mold growth and infestation.

Superior Restoration has a team of highly trained experts who handle any water damage issues – from mild to severe. We are always ready and available to assist you in your time of need. We are open 24/7. Contact us if you have inquiries about water damage restoration services. 

Learn the Categories and Classes of Water Damage

Learn the Categories and Classes of Water Damage

Posted by Ren on with 0 Comment

Water damage in the home can be stressful, but sometimes it isn't awful as it may seem. Indeed, all water damage needs restoration. But some cases are not too critical, and the repair task required isn't too complicated.

However, when a homeowner improperly deals with any water damage issues, the home's structure may suffer from a lasting impairment. As soon as you find any signs of water damage, make haste to seek help from a water damage restoration company.

Furthermore, it is essential to learn about the different categories and classes of water damage. Keep reading to gain enough knowledge about them and know how to handle a water damage problem in your home.

What are the Categories of Water Damage?

Understanding the categories of water damage may help you describe the situation clearly to the experts. This will help them recognize the cause of water loss and proceed with the best solution.

Category 1: Clean Water

  • This category refers to the water damage caused by fluid coming from a sanitary source.
  • Sources include broken water supply lines, a faucet, a failed water heater, or a toilet tank.
  • It may begin as clean water. But, it can swiftly climb into Category 2 or 3 if not treated immediately or becomes contaminated water.

Category 2: Gray Water

  • This category includes water with unsafe contaminants, which could cause discomfort or sickness when ingested.
  • Grey water can come from sources like a leaking dishwasher, a washing machine overflow, a flush from a sink drain, or a toilet overflowing with urine.
  • Like Category 1, this situation can quickly turn into Category 3 if not correctly dealt with.

Category 3: Black Water

  • This category is the worst water damage level. It came from grossly unsanitary fluid.
  • Blackwater consists of human and animal waste, along with other toxins, pollutants, and impurities that could cause grievous illness or even death if ingested and not adequately treated.
  • Sources include standing water containing microbial growth, sewer backup, wind-driven rain, flooding from rivers or streams, or toilet overflows with feces.

Know the Classes of Water Damage

The following information below will help you identify which class of water damage you are encountering in your home:

Class 1

  • This class is the easiest to handle since it is the least severe of all.
  • It has a slow absorption rate. Only a part of the room or area is affected, and there is minimal to no wet carpet to salvage.
  • Moisture only affects materials with low permeable characteristics like concrete or plywood.
  • Light repairs will possibly be necessary.

Class 2

  • With a fast absorption rate, this class can affect the whole room or area containing carpets or cushions.
  • Moisture has moved at least 12 inches or 1 foot up to the walls and remained in structural materials.

Class 3

  • This class has the fastest absorption rate.
  • The water source may have come from above or have traveled more than 24 inches up the walls.
  • The entire room, including the ceilings, walls, insulation, sub-floors, and carpet, are saturated with moisture.

Class 4

  • This class means that materials with low permeability like hardwood floors, plaster, and concrete are significantly saturated.
  • This type of damage requires special water restoration procedures.

Seek Assistance from Water Damage Restoration Specialists

Knowing the categories and classes of water damage can help you deal with the problem properly. But, if your home suffers water damage, seek help from water damage restoration professionals immediately.

Superior Restoration specializes in water damage restoration services. Our trained professionals make use of the latest technology to help restore your home in order.

We are available in emergencies and always ready to serve you 24/7. Contact us to learn more about our services.

Things To Know About Drywall Water Damage

Things to Know About Drywall Water Damage

Posted by Ren on with 0 Comment

Are you a victim of drywall water damage? Water damage in your ceiling and walls is due to roof leaks that come from either flooding, broken pipe, or condensation from your central air conditioning. This is a serious issue that can cause much anxiety especially if it’s your first time repairing water-damaged drywall.

However, with a little care and patience, you’ll be able to know the causes and fix this mess with our tips below.

Drywall Water Damage

What is drywall?

Surprisingly, drywall is a panel of calcium sulfate dihydrate which is called gypsum and it is sandwiched between two types of paper. One side is light-colored and the backside is darker. The drywall or gypsum board is relatively fire-resistant and used as a building material for ceiling, wall, ceiling, and partition systems in homes or institutions.

What causes water damage to your drywall?

Various things can cause water damage to your drywall. The most common source of water is due to flooding or leaking pipes. Nevertheless, your home’s drywall can be exposed to water in a wide variety of ways. Even a small splash can make a huge impact.

What’s more dangerous are the hidden leaks that can be damaging not only to the structural integrity of your home but to your wellbeing as well. Hiring a trained professional for mold remediation may be necessary if the problem persists.

What are the signs?

Know the signs of drywall water damage so you can easily detect them and protect your family from the dangers of water damage.

  1. Presence of musty smell/odor in your home.
  2. If drywall is wet to touch and has water stains
  3. Bulging or sagging walls

How to Repair Water-Damaged Drywall

Wet drywall absorbs water, thus, a perfect environment for mold growth. So it is necessary to repair damaged drywall as soon as possible.

Step 1: Remove or Cut Out the Damaged Areas/Sections.

For minor drywall water damage, you can just dry it. To remove the damaged area, cut it out as a square or a rectangle. In this way, it will be easier for you to cut and fit patches. 

For ceilings, use drywall clips if patches are 12 square inches or less to hold them in place. Larger than that, they should be attached to the ceiling joists. This is to securely hold the patch’s weight and the insulation above it. 

You can use drywall or keyhole saw to get rid of the damaged area/section. Be cautious with wires and plumbing as you work.

Step 2: Dry the Affected Area.

Drying the affected area will greatly help in preventing further damage and growth of mold. Ensure that the area is completely dry. You can use a moisture meter to gauge the level of moisture.

For additional drying tips, using blowers, dehumidifiers or advanced equipment will do the job. Keep it on until your wet drywall including the wall cavities or interior of the wall is fully dried out.

Step 3: Fix Cracked Area or Install New Drywall.

If the damage in your drywall is minor, just patch the damage using a joint compound. You can find and buy this at your local hardware store. If needed, you can apply some drywall tape.

For large sections, you can install new drywall. But before that, measure the size of the hole and cut out the drywall a little bit bigger than the hole. Then put it around the hole and secure each side to the suds using the drywall screws.  

The next thing to do is to apply tape and joint compound to match it with your existing drywall. You can apply joint compound a few times for a smoother and better surface. Let it dry overnight before doing the next step.

Step 4: Paint the Restored Drywall.

To make the joint compound even, sand it until it becomes smooth and flat. After that, paint the drywall with primer to seal the area. Then, paint the entire wall to make the color even throughout. 

 

Prevent Drywall Water Damage

If your home is prone to water damage, use a waterproof hardboard made from waterproof composite material or pressed wood fibers. Proper maintenance should be maintained to avoid the same issues in the future. Let experienced and skilled professionals from Superior Restoration handle your water-damaged drywall. 

Whether your basement floods or you have leaks in your roof, we are ready to restore your home to its former state. Please call us now! We are available 24/7.

How To Repair Water Damaged Ceilings - Must-Know Steps

How to Repair Water Damaged Ceilings – Must-Know Steps

Posted by Ren on with 0 Comment

Water damage to ceilings is a very unwanted issue. If not properly treated, it can make a serious threat to your lovely home. Moreover, it can cause mold infestation and health problems, and cost a great deal of money to repair.  

The trouble begins once water meets your ceilings. It can degrade the quality of the ceiling material, and the resulting damage can be pretty annoying.  

You, as a homeowner, must know how to identify the signs and causes so that you can repair your water damaged ceilings as soon as possible.

 

What are the signs of water-damaged ceilings?

 Most types of ceiling damages are due to water exposure. Take note of the following sign: 

  • Cracks in the Ceiling 

Ceiling cracks can show up either in a straight line or a spiderweb pattern. They can be a sign of a water-damaged ceiling. 

  • Peeling Paint 

Water is destructive. It can cause your ceiling paint to peel, flake, and even crack. In addition, you might notice the trim and baseboards starting to separate from your ceiling or walls.  

  • Water Stains

Water stains on your ceiling are one of the most recognized signs of water damage. They often appear yellowish, rusty, or dark and moist. You may notice that your ceiling seems perspiring.

  • Sagging 

Over time, even a minor water leak can cause your ceiling to sag or swell.  

  • Mold Growth

 Water damage and mold growth often go together. You may identify a mold problem in the corners of your ceilings and walls, particularly if there's high humidity in the room. 

 

What are the causes of water-damaged ceilings?

 Some of the most causes are:

  • High Humidity 

If there's high humidity in your home, water damage may occur.

  • Damage in your Home Structure

If a part of your ceiling or wall is damaged, it can create holes and cracks where water can flow through. 

  • Roof and Plumbing Leaks

Pay attention to where exactly the leak comes from. A faulty part in the shower, drain, sink, or toilet may have probably caused it. 

If you notice water dripping from your ceiling whenever there's heavy rainfall, you can expect that there's a leak in your roof and you need to inspect it right away.

  • Age of Your Home

 Your home starts to deteriorate as it ages. You can see cracks in walls and ceilings where water may leak through.

  • Ice Dams, Clogged Gutters, or a Broken Pipe

 Without proper care and inspection, these problems can cause water damage to your ceilings. 

 

How To Repair Your Water Damaged Ceilings

The following steps may help you repair your water damaged ceilings:

  1. Remove your Belongings.

Move your hard and fabric items away from wet areas. Then lay down towels or rags on the floor to absorb as much of the liquid as possible. Also, place buckets and other containers to catch the water dripping from the ceiling. 

  1. Identify the Source of Water Damage.

Find out where the water damage started. You may start checking some of the following common areas in your home:

  • A burst pipe or loose plumbing connections can cause water damage. 
  • Check for holes in your roof from the attic. Roof leaks can lead to water-damaged ceilings.
  • Any damage to exterior walls permits water to flow into the ceiling and wall cavities. So try to locate where the damage is.
  • You can also check for leaks around the appliances in the bathroom and laundry area (water heater, washing machine, etc.). 
  1. Reduce the Damage.

Once you identify the source of the leak, the next step you need to do is to reduce further damage. You can do it by turning the water off and tightening hose connections.  Take time to dry the affected areas before repairing the damaged ceiling.

Clean the area with bleach or DIY cleaning solutions to prevent mold growth.

  1. Fix the Source of Water Damage.

Fix the source of the problem or else, you will end up with further water damage. If the source of the leak is a broken pipe, you will probably have to contact a professional. 

  1. Remove the Water Damaged Ceiling and Make Repairs.

Once the source of water damage is fixed, start removing and replacing damaged drywalls or ceiling materials. Before working on it, wear safety goggles and a dust mask for protection. 

Lay down drop cloths or tarps to catch all the dust and debris as you remove wet drywall, for it crumbles easily. 

If the ceiling is only water-stained, you can cut out the damaged part and replace it with a new ceiling material. However, if the damaged area is about 12 square inches or more, consider changing the whole ceiling panel. 

After replacing the damaged ceiling, smooth down any rough areas using sandpaper. With a putty knife, fill small holes with joint compound and let it dry before smoothing it out again with the use of more sandpaper. 

Dry the affected areas properly to avoid the possibility of future mold infestation that might require you to contact mold remediation specialists. 

  1. Prime and Paint the Ceiling.

When you have already repaired your ceiling, open your windows for better ventilation. Your area should be well-ventilated before the priming and painting process. 

Apply primer to your entire ceiling and let it dry. Then repaint it evenly. 

 

Seek Help from a Water Damage Restoration Company

Immediate action is important when there's water damage on your property. Severe issues may require you to contact a water damage restoration company. Superior Restoration is always ready to help you in emergencies. We are available 24/7.  

For inquiries about water damage restoration and mold remediation services, contact us today!

8 Tips To Prevent Mold In The Garage

8 Tips To Prevent Mold In The Garage

Posted by Ren on with 0 Comment

Mold can grow anywhere, both indoors and outside. In homes, they thrive in damp areas that have little ventilation and sunlight. A garage can be a perfect haven for mold when the right conditions are present. But, don’t panic, yet. There are many ways to keep mold from growing in your garage. 

 

How to Keep Mold From Growing In your Garage

Because garages are fully exposed to elements every time it is being operated, it can create a perfect environment for mold, like black mold, to settle in. When not sealed properly, rain or snow can easily penetrate inside your garage. Additionally, garages are used to store items like cardboard and paper products, wood, and fabric which are a food source for mold. 

  1. Inspect your garage for leaks

To keep mold from growing in your garage, it is important to check the overall situation of your garage. This includes checking the area for leaks. Leaks can cause small puddles to form and eventually become the cause of mold growth. 

Check roof, gutters, and pipes to ensure they are in good condition and fix the damage immediately. 

  1. Seal your garage door

To prevent unwanted water from entering your garage, you need to properly seal and insulate your garage. If the weather stripping is damaged, torn, or crumbling, replace it with a new one. You should also consider installing a pre-insulated garage door panel (one that has a higher R-value)

  1. Reduce the humidity level

In general, garages are exposed to elements causing them to attract more moisture. A garage may have over 50% humidity levels which give mold the condition to grow. 

 To help decrease the humidity levels, you should keep your garage well-ventilated and dry. Install humidifiers and fans and open doors and windows for a couple of hours to allow sunlight inside the garage. 

  1. Remove standing water immediately

There are several ways water can seep into your garage, like outside precipitation, flooding, or even the moisture brought by your car tires. Pooling water inside the garage does not only cause mold spores to thrive but can also damage the structure of your home. Remove excess water with a mop or an old towel and dry the area immediately to prevent mold growth. 

  1. Have a good drainage system

A good drainage system is important to avoid water from pooling inside your garage. Not only that, but a proper garage floor slope can also help divert water away from your garage. These methods are essential to prevent water damage and mold growth.  

  1. Organize your garage storage properly

If you use your garage to store your belongings, you have to organize them properly and keep your stuff away from water. Instead of placing your stuff on the floor, install shelves for storage. With this, you are sure that they won’t get damaged in case of flooding. 

  1. Extend gutter downspouts

Gutters and downspouts help protect your home and garage from precipitation. Extend your gutter downspouts at least 10 feet away from the garage foundation and keep them clean to prevent moisture buildup inside your garage.

  1. Build your garage with mildew-resistant products

If you are getting a new garage installed or remodeling an old one, use mold-free materials like metal studs for storage. You may also consider installing mold-resistant drywall and waterproof paint. A pre-coated aluminum or vinyl siding can also help protect your garage walls from water damage. 

Contact Superior Restoration For Mold Removal Services

Mold will not thrive in your garage when you deal with moisture problems immediately. Follow the tips above to keep mold from growing in your home and garage. 

 For professional water damage restoration and mold remediation services, contact Superior Restoration.

The Most Common Sources Of Water Damage In Homes

Posted by Ren on with 0 Comment

Water damage can occur from different sources. Making it a common problem for homeowners. When water creeps into the areas of your home or property, it could cause serious water damage. Water can warp your floor, discolor paint on your walls and ceilings, and ruin your wood. Floodwater can contaminate the area with mold growth. Worst is, the water damage that is left unattended can compromise the structure of your property. However, water damage can be prevented in many ways. With proper knowledge of the most common sources of water damage, you can protect your home or building from serious water damage.

Sources of Water Damage in Homes

1. Damaged Pipes

Pipes, especially the old ones, are prone to getting damaged and eventually burst. To avoid a burst pipe, check your plumbing system regularly for any signs of damage. Replace these pipes with PVC when necessary.

Be on the lookout for cracks, stains, bulges, and wetness on your ceiling walls. An increase in your water bill is also a sign that you are dealing with leaking pipes. Contact a plumber immediately to avoid larger plumbing problems in the future.

2. Malfunctioned Appliances

As appliances get older, their pipes become rusty and hoses weaken. When parts of these appliances are broken, they become one of the common causes of water damage in homes.

Washing machines are one of the most common appliances that can cause water damage. In most cases, washing machines leak due to rubber hose failures. Inspect the supply hose at least once a year and replace it (with reinforced hoses) every three to five years.

Water damage from a water heater normally occurs due to the old water heater itself and poorly maintained machine. Water heaters are another appliance that can frequently cause water damage in homes. So, make sure to check the machine regularly. Have it inspected with a local plumber at least once every two years to avoid any water damage problems.

Just like washing machines and water heaters, dishwashers and refrigerators can also leak and contribute to water damage. Thus, it is important to keep an eye on these machines.

3. Toilet Overflow

Most toilet overflows occur due to clogged or blocked drains. Toilet drains due to improper disposal of solid items like tissue paper or sanitary napkins. Avoid throwing such items in your toilet to prevent toilet failure.

If your toilet overflows, turn off the supply valve. If the problem often occurs, you may need to call a plumber to check and fix the problem. There might be a bigger problem that is causing your toilet to overflow.

4. Clogged gutters

Gutters are supposed to direct rainwater away from your home. Unfortunately, leaves, branches, and other debris can clog your gutters. If clogged, rainwater won’t be able to flow properly away from your home. Instead, the water will overflow to the edges of your gutters and run down to your home’s foundation. This can cause water to leak inside your home.

5. Clogged or blocked drains

Kitchen sinks and bathroom drains can clog for several reasons. Toiletries, dirt, hair, and grease buildup can block the drain lines and prevent normal drainage. If left unattended, clogged drains can back up and eventually cause water damage to the area and other areas of your home.

6. Natural Disasters

Hurricanes, thunderstorms, and other natural disasters can bring large amounts of water into your home. Strong winds and heavy rains have the potential to damage your roof, which can send water straight down to your home. Flooding can allow water to enter or overflow inside your property.

Before any natural disaster hits your area, take all preventative measures to minimize or prevent any damage. Ensure that the lawn is graded properly away from your home. Repair any missing or damaged shingles on your roof. Make sure you know where the main water supply line valve is.

When water has affected your home, take prompt action by contacting a professional water damage restoration company. They will help you restore your home to its pre-damaged condition.

Professional Water Damage Restoration Services

Accidents do happen and your home may suffer from water damage. In the event of water damage, trust Superior Restoration. It is a leading restoration company in Temecula that offers quality water damage cleanup and restoration services. Call Superior Restoration today.

How To Guard Your Home From Storm Damage

How To Guard Your Home From Storm Damage

Posted by Ren on with 0 Comment

Being caught in extreme weather conditions like hurricanes or storms creates anxiety or fear for most people. Especially for homeowners who are not prepared, this may be overwhelming and can cause serious storm damage. While you can’t control mother nature, there are things you can do to protect yourself and your home from storm damage. Your first and most significant priority must be safety.

Prepare For a Storm

Before a storm falls in your area, make sure you and your home are ready. Basic preparation and maintenance pay off in preventing structurally damaged property. Here are some lists you can do and precautions you can take to prepare your home for a storm.

1. Check your insurance company.

Review insurance policies and update if necessary to ensure you have the coverage you need for your home. Though there are some policies that cover storm-related issues, some types of damage may not be part of your homeowner’s policy. Once the insurer assesses the damage after a storm, you won’t have to worry that your property is protected.

2. Check even the smallest break in the seal of your doors and windows.

Sealing your doors and windows will prevent hurricane winds or tornadoes from damaging your roof from your house. Moreover, it will also prevent water from getting inside.

3. Check the siding of your home’s exterior by looking for its loose pieces.

Due to strong wind, loose siding can cause damage. Be sure to secure them to the frame of your house.

4. Look out for damaged or missing shingles.

Damaged shingles are easy to break loose. Whereas, missing shingles can leave a gap for the wind to get under and cause roof damage. Also, be sure to check the sealing of your chimneys or vents in the roof to avoid the entry of water into your home.

5. Ensure that your gutters and drainage are cleaned out and clog-free.

This will make water free-flowing away from your home and prevent backing up into your house. Furthermore, the grade of your lot works in your favor. It should slope away so water will naturally keep flowing away from your home.

6. Check the fence of your property carefully.

If fence posts are not nailed down properly, it will be a liability on your part. Loose pieces of fencing might break loose because of strong winds. Ensure that gates are secured tightly, too.

7. Check for any debris.

Inspect things that could fly around like tools, plant pots, lawn furniture, or other yard debris. Move them indoors, garage, or shed to prevent damage and injury in a storm.

8. Double-check that your sump pump is functioning properly.

This is very important in keeping your home from water damage. Prepare extra batteries for battery-powered or a backup sump pump for worry-free basement flooding.

9. Keep a working generator on hand.

Because a bad storm could knock out electric power lines for hours or even days, have a working generator ready. Test it to ensure it is working properly and you know how to hook it up safely. Having a standby generator is a great help in the livability of your home.

10. Trim trees.

Regularly trim trees since dead branches could go flying around in the strong wind. This will prevent damage to the windows and roof of your home, your vehicle, or your neighbor’s property.

11. Check that your insurance covers your home from potential tree damage caused by a storm.

12. Create a storm safety plan.

That includes identifying safe rooms of your home such as an interior room in your basement or the lowest level of your house. This is to protect your family from the worst storms or tornadoes.

Protect Your Home From Storm Damage

Evaluate your home and its needs to help protect against damage to your home when it is faced with a bad storm. Follow the list above to secure you, your family, and your property.

Professional Water Damage Restoration

Storm damage, flood damage, hail damage, and wind damage can all be destructive. Even if the storm has passed, it can leave negative marks on you and your property. Our team at Superior Restoration is committed to giving you and your family the best services to restore your home as quickly as possible after a storm.

Need help with water damage quality cleanup and restoration services? Please contact our office today. We are available for emergencies 24/7.

Tips To Prevent Water Damage in Your Home While on Summer Vacation

Tips To Prevent Water Damage in Your Home While on Summer Vacation

Posted by Ren on with 0 Comment

It's difficult to enjoy your summer vacation without worrying about what will happen at home when you're gone. Statistics show that water damage can cause thousands of dollars in damage and repair. Furthermore, most incidents occur unconsciously, but there is often a way to prevent water damage. In this post, you will learn how to prevent water damage in your home while on summer vacation.

How to Prevent Water Damage While on Summer Vacation

Who does not want to enjoy the summer vacation without any worries? Here are some tips to prevent water damage inside your home while you are away for summer vacation.

Make sure to inspect your drain and sinks.

Regular inspection of your drain lines and sinks will help you prevent water damage from happening inside your household. In addition, you need to avoid putting grease and oil down the drain and regularly cleaning using chemical cleaning agents.

Debris and dirt stuck in your sink should be thrown in the trash. Trapped dirt can also cause clogging. Moreover, make sure that your tub’s overflow drain is working and not leaking.

Check major appliances.

Check your kitchen and bathroom appliances for any signs of potential leaking. If you see that it’s defective, fix the issue right away.

  • Regularly inspect your refrigerator. If it has its water dispenser or ice maker, double-check the water line hose for leaks.
  • Properly maintain your HVAC unit to avoid clogging because of the debris and dirt buildup.
  • Inspect your water heater if there’s some damage and check the sticker from the manufacturer to know its age. If the water heater is old, replace it to avoid water damage because of too much tank pressure.

Shut off your main water supply.

Before you go on your summer break, make sure to shut off the water supply to your home. Homes can be left vacant for a few days or even weeks while you are away. Even a slight drop of water can cause significant harm. So, it is best to shut off the valves to help you avoid accidents caused by any water movement.

Seal your windows.

Seal all windows to prevent rainwater from entering your home and causing water damage if it rains when you are away.

Install a Leak Detector.

A leak detector can alert you once it has detected water.

It is best to install a leak detector in the following areas:

  • In the Laundry room
  • Near the HVAC unit
  • Basement and water heater closets
  • Under the kitchen sink.
  • Near any pipes, and appliances like washing machines and dishwashers.
  • Near the sprinkler systems

Monitor your water bill.

An increase in your water bill is a sign of water damage. Track your water bill regularly to determine whether you are dealing with a water leak or not.

Clean your gutters and downspouts.

Tree debris, leaves, and dirt stuck in the gutters can keep water from flowing freely away from your home. Cleaning your gutter can prevent serious water damage in the event of a sudden heavy rainfall or hurricane in your city.

Monitor and check your sump pump.

Regularly monitor and check your sump pump to ensure it is in good condition. Check if the sump pump is connected to a functioning electrical outlet. Also, check it to ensure that it is upright position and not tilted. It is also important that you test the backup pump by unplugging the main pump.

Fix water leakage.

Before you go on your trip, fix any repairable water leaks inside your household. Furthermore, check for dark spots around your pipes and on the ceiling. In case of an urgent water leak, contact a plumber as soon as possible before leaving town.

Hire a professional water damage restoration company.

Water damage restoration professionals can help you deal with the damage at ease. Hire a reputable water damage restoration company like Superior Restoration to help you restore affected areas in their pre-damaged condition

Professional Water Damage Restoration

If your home suffers from water damage, contact a reputable water damage restoration company like Superior Restoration.

We, at Superior Restoration, offer 24/7 efficient water damage restoration services. Our technicians are highly trained and they use high-quality equipment to help you with your water damage issues. To know more about our services, call us today.

 

7 Ways To Protect Your Kitchen From Water Damage

7 Ways To Protect Your Kitchen From Water Damage

Posted by Ren on with 0 Comment

The kitchen is one of the most significant rooms in your house, as it is a multipurpose room wherein you can do your cooking and cleaning. Nowadays, homeowners tend to ignore the problems under their sink or appliances because of their busy schedules. However, most household floods occur due to plumbing and appliance failure. One of the most common scenarios that cause water damage to your kitchen is when the dishwasher malfunctions and floods gallons of water. 

Water damage in your kitchen can cause several problems, including cosmetic damage, mold growth, and even an unpleasant smell. Often, if you fail to neglect the problem, there are always consequences. This article will help you protect your kitchen from water damage.

 

Common Causes of Water damage in your kitchen

To know what to protect against water damage, here are some of the most common causes of water damage in your kitchen.

  1. Pipe problems are the most common source of water leaks under your sink. If homeowners ignore this issue, it will burst and flood the kitchen.
  2. Dishwasher leaks can be a source of water damage in your kitchen. An old, broken, and defective dishwasher can cause leaks, damage to your floor, and even mold growth.
  3. Refrigerator leaks can cause water damage in your kitchen, as sometimes melted ice from defrosting can cause leaks. Furthermore, if your refrigerator has internal problems, it is very likely to cause water damage.
  4. Back-splash and sink caulking can cause discoloration and water damage to your countertop tiles.

 

Ways to Protect Your Kitchen From Water Damage

1. Regular maintenance

The most important thing you can do to protect your kitchen from water damage is to inspect the sinks, drains, and pipes, as well as the kitchen appliances, regularly. As with the sink, check for missing or deteriorated caulk. Remove the old caulk and clean the area thoroughly and re-seal it with fresh silicone. Furthermore, sweep the drain regularly, empty the filter and dispose of the debris in the garbage, and inspect the supply lines and valve for cracks.

2. Check your appliances

Check the user’s manual for instruction and proper use of every water-related appliance installed in your kitchen. For the dishwasher, check this procedure to prevent the dishwasher from flooding your kitchen. Check the appliances that need water, such as the coffee maker, ice maker, and water cooler, as they can become the cause of water damage in your kitchen. You may call a professional to check and repair damaged appliances and professional restoration for water damage clean-up. 

3. Garbage clean-up

Fats, oil, and grease are common in the kitchen. Pouring them down the drain can cause clogs and sewage backup, which may result in significant kitchen water damage. If your kitchen sink is clogged, use a solution of hot water, baking soda, and vinegar to unclog the fats and oils in the pipes. Also, make sure to throw out the debris in the trash and clean the sink properly using paper towels for greases and oil and soap or bleach solution for the sink itself.

4. Shut off your water line

Make sure to shut off your main water line, especially if you're away and having some flood issue. As mentioned, dishwasher leaks are one of the most common culprits of water damage in the kitchen. So, make sure to only use the dishwasher if someone is at home and available to attend in case a problem arises. 

Furthermore, it is also important that every member of your household knows where the shut-off valves are located. So in case of an emergency, they can mitigate the damage by turning off the water source. 

5. Install leak detectors

One of the best ways to catch water damage before it could even cause serious damage to your home or business is by installing a water or leak detector. A leak detector monitors the flow of water through a pipeline, can detect moisture in the air for molds, and tracks the water temperature. Also, it can shut off your water line in case of an emergency. Install leak detectors under the kitchen sink, near the dishwasher and refrigerator.

6. Monitor your water bill

One of the signs of having a water damage issue inside your kitchen is a sudden increase in your water bill. If you noticed sudden changes, try to check if there are hidden issues under the kitchen sinks, under the refrigerator, and all the appliances in your kitchen. 

7. Fix water leaks

Water leaks in your kitchen may occur in areas under your sink, dishwasher doors, and underneath the refrigerator. If crucial water damage happened in the kitchen, try to fix and restore the visible damage to avoid water leaks. In case of a water-damaged kitchen, do not hesitate to call for an emergency backup like a restoration company.

Does Water Damage Invade Your Kitchen? Call For Help.

The kitchen is considered one of the most significant rooms in your home as it is the center of the family's day-to-day living. Also, the kitchen has all the things you need to survive, like water and food. However, it is such a hassle to encounter water damage, especially in this area. Thus, it is important to protect your kitchen from water damage scenarios.

In case of crucial water damage in your kitchen, do not hesitate to call a professional water damage restoration team like Superior Restoration. We have highly trained technicians and top-of-the-line equipment that can assist you in cleaning and drying your water-damaged kitchen. 

 For water damage restoration services, call us today.